The Litter-Robot 3 Manual: Quick Start Guide & Tips is a comprehensive guide for pet owners who have recently purchased the Litter-Robot 3. The manual provides step-by-step instructions on how to set up and use the automatic litter box, along with some useful tips to ensure that your cat has a comfortable and safe experience. It is important to note that the Litter-Robot should not be pushed against a wall or into a corner, and cats must weigh at least 5 lbs. to use the litter box in automatic mode. The manual also recommends placing the Litter-Robot in the same location as the old litter box during the transition period, and using low pile mats or rugs under the unit. Additionally, users are advised to use clumping litter or litter beads and crystals that are small enough to pass through the screen. The manual concludes with instructions on how to power up the Litter-Robot, and a reminder to download the AutoPets Connect app for Litter-Robot Connect units. For further assistance, users can visit litter-robot.com/help.
Quick Start Guide
Never push the Litter-Robot against a wall or into a corner (must not be touching any walls).
Cats must weigh at least 5 lbs. to safely use the Litter-Robot in Automatic Mode.
https://support-litter-robot.force.com/s/article/Getting-Started-with-your-Litter-Robot-3 For a complete guided online experience and tips on acclimating your cat, please scan the OR code or visit litter-robot.com/gettingstarted 
• If possible, place the Litter-Robot in the same location as the old litter box (at least during transition).
• Make sure the unit is indoors on a firm, level surface and in a cool, dry location.
• Place litter mats or rugs in front of, or completely under, the unit. Do not place mats partially under the unit. Use only low pile (1/4 inch) mats or rugs under the unit. 
• Use clumping litter or litter beads and crystals that are small enough to pass through the screen.
• Add litter until it meets the raised fill line when spread flat (about 8-10 pounds). Be careful not to overfill.
• Insert the small plug end of the power cord into the socket on the back of the base.
• Plug the AC/DC adapter into a wall outlet.
• Press the Power button on the control panel.
The Litter-Robot will now perform an initial clean cycle.
Litter-Robot Connect units only – look for the WiFi 
symbol on the control panel. Download the AutoPets Connect app and follow the onboarding instructions.
Need help? Visit litter-robot.com/help
SPECIFICATION
| Product Specifications | Description |
|---|---|
| Weight Limit | 5 lbs. minimum weight for cats to use the Litter-Robot in Automatic Mode |
| Location | Indoors on a firm, level surface and in a cool, dry location. Never push against a wall or into a corner |
| Litter Type | Clumping litter or litter beads and crystals that are small enough to pass through the screen |
| Litter Amount | Add litter until it meets the raised fill line when spread flat (about 8-10 pounds). Be careful not to overfill |
| Mat Type | Use only low pile (1/4 inch) mats or rugs under the unit. Place mats completely under the unit, not partially |
| Power Source | Plug the AC/DC adapter into a wall outlet. Insert the small plug end of the power cord into the socket on the back of the base |
| Clean Cycle | The Litter-Robot will perform an initial clean cycle after pressing the Power button on the control panel |
| Connectivity | For Litter-Robot Connect units only – download the AutoPets Connect app and follow the onboarding instructions |
| Additional Help | Visit litter-robot.com/help for further assistance |
FAQS
Where should I place the Litter-Robot during the transition period?
If possible, place the Litter-Robot in the same location as the old litter box (at least during transition).
Can I download an app for my Litter-Robot?
Yes, for Litter-Robot Connect units, download the AutoPets Connect app and follow the onboarding instructions.
Should I place mats or rugs under the Litter-Robot?
Yes, place low pile mats or rugs in front of, or completely under, the unit. Do not place mats partially under the unit.
What should I do if I need help with my Litter-Robot?
Visit litter-robot.com/help for assistance.
How much litter should I add to the Litter-Robot?
Add litter until it meets the raised fill line when spread flat (about 8-10 pounds). Be careful not to overfill.
What type of litter should I use with the Litter-Robot?
Use clumping litter or litter beads and crystals that are small enough to pass through the screen.
Can I push the Litter-Robot against a wall or into a corner?
No, the Litter-Robot should never be pushed against a wall or into a corner.
What is the weight requirement for cats to use the Litter-Robot in Automatic Mode?
Cats must weigh at least 5 lbs. to safely use the Litter-Robot in Automatic Mode.
